HOW CAN THE USER SETUP THE AMPED 600mW RANGE EXTENDER

  1. Home
  2. AMPED EXTENDER
  3. HOW CAN THE USER SETUP THE AMPED 600mW RANGE EXTENDER

AMPED 600mW RANGE EXTENDER

 

AMPED 600mW RANGE EXTENDER

 

The Amped 600mW extender comes with many new features. It comes with dual 2.4GHz amplifiers, which quickly eliminate the dead points, and it also comes with high gain antennas, and the user can quickly expand the coverage area up to the 10000 sq ft. The user can easily attach many devices, and it offers the most powerful network signals. You can easily use all apple devices. Amped 600mW Range Extender can come with the guest network, parental control features so you can easily block the websites. It comes with the best security features, and you can use your extender freely. The user can also use the Amped extender as AP mode or bridge mode, and you can easily handle all devices from anywhere with the help of the Amped ally app.


SETUP OF THE AMPED 600mW RANGE EXTENDER 

  • The user can unbox the Amped 600mW range extender.
  • Now you can unplug the modem.
  • You can place the Amped extender near the Amped router.
  • Now you can connect the antennas with the Amped extender.
  • The user can attach the power supply with the Amped 600mw range extender.
  • You can check the power of the Amped extender is working.
  • Now you can see if it was not working, then you need to press the on/off light so they can start working.
  • After this, you can attach the modem, computer, and extender with the ethernet cable.
  •  Enter the www.setup.ampedwireless.com or the IP address 192.168.1.240.
  • The user now inserts the admin in the given space, and now the username and password are an admin here.
  • After this, you can see the setup wizard.
  • Here you enter the region, time, and language of your area.
  • You can now scan the wifi.
  • Now the wifi can detect itself, but if it not detects, then you need to enter manually.
  • After this, you can easily access the settings.

 


SETUP OF THE AMPED EXTENDER WITH WIRELESS PROTECTED SETUP 

  • Unwrap the Amped 600mW range extender.
  • Place the Amped extender near the Amped router.
  • Now you can attach the power adapter with the Amped extender.
  • Switch on the power supply.
  • Here you can check the power of the Amped extender is working, and if it was not working, then you need to press the on/off button of your Amped extender.
  • Locate the WPS button on the Amped extender and the router.
  • You can press the WPS button on the Amped extender, and after this, now press the WPS button of the router for a few seconds.
  • Here the lights start blinking.
  • It means the connection is built.
  • Now it can catch the settings of the Amped extender.
  • After this, you can easily access the settings.

SETUP OF THE AMPED 600mW RANGE EXTENDER WITH ALLY APP

  • The user can now download the Amped ally app.
  • Here you can unbox the Amped 600mW range extender.
  • Later this. You can enter the details of the Amped extender.
  • Now you can scan the QR code of the Amped extender.
  • Here they can catch the settings in a few seconds.
  • After this, you can easily enjoy all the benefits of the Amped extender.

LOGIN OF THE  EXTENDER

  • You can open the web browser.
  • Here you enter the IP address 192.168.1.240. or enter www.setup.ampedwireless.com
  • The user enters the username and the password because here, both are admins.
  • After this, you can easily access the advanced settings.

FIRMWARE UPDATE OF THE EXTENDER

  • The user launches the web browser.
  • Here you enter the www.setup.ampedwireless.com or enter the IP address 192.168.1.240.
  • Now the user enters the username, and the password here the both are admins.
  • After this, you can click on the Advanced settings.
  • Again. You click on the firmware update.
  • Now the firmware takes a few seconds for the update.
  • Here you have the latest version of the firmware.
  • The user can also set the timings in the settings and get an auto-update of the firmware.

FIRMWARE UPDATE WITH AMPED ALLY APP 

  • You can install the Amped ally app from any play store.
  • Now you can open the app.
  • Enter the details of the Amped range extender.
  • Here you can click on the settings and then on the firmware update.
  • You get the update firmware after a few seconds.
  • The user also gets the new security patches.
  • After this, you can also set the timing for the auto-update.
  • You get the alert when the latest version of the firmware release.
  • The user can now easily update the firmware.

SOFT RESET OF THE  RANGE EXTENDER
  • Open the web browser.
  • Enter www.setup.ampedwireless.com.
  • Now you enter the username and the password, which are the admin here.
  • Now you can click on the Advanced settings.
  • Again click on the factory reset.
  • Here you get your Amped extender in the default settings.
  • You can now set up again with the same process.

RESET OF THE  EXTENDER
  • Locate the reset button on the Amped extender.
  • You can press the reset button with the paper clip.
  • Now the lights start flashing.
  • Release the reset button and lights come stable.
  • It means your Amped extender is reset.
  • The user needs to set up again with the same process.
  • If you want to know more, then please chat with us.
Previous Post
HOW CAN WE SET UP AND LOG IN THE ARTEMIS AC 1300 EXTENDER
Next Post
HOW CAN THE USER DO THE FIRMWARE UPDATE IN THE AMPED 600mW Gb EXTENDER

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu