HOW CAN THE USER DO THE FIRMWARE UPDATE IN THE AMPED 600mW Gb EXTENDER

  1. Home
  2. AMPED EXTENDER
  3. HOW CAN THE USER DO THE FIRMWARE UPDATE IN THE AMPED 600mW Gb EXTENDER

AMPED 600mW Gb EXTENDER

AMPED 600mW Gb EXTENDER

 The Amped 600mW Gb extender comes with lots of technological features, and it has offered dual – high power amplifiers and dual high power antennas. The extender also has a breakneck speed of the network. The Amped 600mW Gb extender comes with the powerful internal processor and Gigabit cable to connect the many devices wit your extenders. The users also get the best security features in this extender. It also has a smart firewall, so there is no chance of cybercrime. You can play games, watch the HD videos, and you can also access the guest network easily. The user can attach the many devices easily and also manage all devices with the help of the Amped ally app. You can also get fast and stable speed in every inch of your home.


WEB DOMAIN SETUP OF THE AMPED 600mW Gb EXTENDER 

  • First, the user can unwrap the extender.
  • Here the user can check the home network.
  • You can place the extender near the router.
  • Attach the power supply with the extender.
  • Check the light of the extender is working or not.
  • If the user sees the power light of the extender is not working, then the user holds the on/off button of the extender.
  • You can connect the extender, modem, and the computer with the help of an ethernet port.
  • The user can now open the web browser.
  • Here the user can write the www.setup.ampedwireless.com or the IP address of the extender is  192.168.1.240
  • Now the user can write the username and the password here; the username and the password both are admins.
  • You can now write the details on the set up wizard-like time, the language of the region.
  • Here the user can click on the scan the wifi.
  • It can detect the wifi.
  • If they do not detect the wifi, then the user enters them manually.
  • The user can use the extender.

WIRELESS PROTECTED SETUP OF THE AMPED 600mW Gb EXTENDER

  • You can now unbox the Amped extender.
  • Here the user can place the extender near the router.
  • You can connect the electrical supply wit the extender.
  • After this, the user can now check the electrical supply of the extender is adequate or not.
  • If it is not adequate, then the user can press the on/off button on the extender.
  • You can now locate the WPS button, the extender, and the router.
  • Here the user can press the WPS button first on the extender and the router.
  • After this, the user can see the light start blinking.
  • It means both devices are attached.
  • Now you can wait for a couple of seconds.
  • The user can now use the extender easily.

SETUP OF THE AMPED 600mW Gb EXTENDER WITH THE AMPED ALLY APP 

  • The user can unbox the Amped extender.
  • Here the user can check the internal signals are active.
  • Now the user can connect the power supply with the extender.
  • You can now check the LeD light of the extender is working.
  • In case it is not working, then the user can press the on/off button on the extender.
  • After this, the user can download the Amped ally app from the play store.
  • Here you can install it.
  • Now the user can write the details of the extender in the app.
  •  Scan the QR code of the extender.
  • The user can now wait for a few seconds.
  • Here it starts catching the settings.
  • After a few seconds, the user can now use the extender.

LOGIN INTO THE AMPED 600mW Gb EXTENDER

  • Open the web browser.
  • Here the user can enter the www.setup.ampedwireless.com or the IP address of the extender is 192.168.1.240
  • You can write the username and the password as admin.
  • After this, the user can now access advanced settings.

FIRMWARE UPDATE IN THE AMPED 600mW Gb EXTENDER

  • You can launch a web browser.
  • Here the user can write www.setup.ampedwireless.com or the IP address 192.168.1.240
  • Now you can tap on the advance settings.
  • You can again tap on the firmware update.
  • The user can wait for a couple of seconds.
  • Here the user can adjust the time for the auto-update of the firmware.
  • You can now quickly get the latest firmware update and the security patches.

FIRMWARE UPDATE OF THE AMPED 600mW Gb EXTENDER WITH THE AMPED ALLY APP 

  • Download the Amped ally app from the play store.
  • Here the user can write the model of the extender.
  • After this, the user can now click on the settings.
  • Here the user can again click on the firmware update.
  • You can set the time for the auto firmware update.
  • Here the user can also get the alert about the latest firmware.
  • Now the user has the latest firmware with the latest features.

RESET OF THE AMPED 600mW Gb EXTENDER WITH THE WEB DOMAIN 

  • Here the user can open the web browser.
  • Now the user can write the www.setup.ampedwireless.com or the IP address 192.168.1.240
  • You can now enter the username and the password, here the username is admin, and the password is the password.
  • After this, the user can now click on the advanced settings.
  • You can again click on the factory reset,
  • The user can wait for a few seconds.
  • Now the user gets the extender in the default settings.

HARD RESET OF THE AMPED 600mW Gb EXTENDER

  • Locate the reset button on the extender.
  • Here the user can press the reset button with the help of the paper clip for a few seconds.
  • The LeD lights start flashing.
  • It comes stable after the user can release the reset button.
  • Here the user gets the extender in the default settings.
  • You can now again set up your extender with the same method.

FREQUENTLY ASK QUESTION (FAQS)

Q; In which way, the user can access the parental control feature in the Amped 600mW Gb extender?

A; The user can easily access the parental control feature in the advance settings. Here the user can open the web browser. Now the user can write the www.setup.ampedwireless.com or the IP address of the extender. Here the user can write the username and the password, and both are admins. You can now click on the advance settings, and here the user can access the parental control feature

Q; What is the reason the user not able to access the web domain in the Amped 600mW Gb extender?

A; If the user can not access the web domain in the Amped extender, then the user can first check the home network is working well. Then you can check your all devices are correctly fit with the ethernet cable. Now you can open any other browser. Here the user can use the update web domain. Now, you can write the www.setup.mpedwireless.com, or you can also enter the IP address of the extender. Here the user can access the web domain. If the user can not be able to access the web domain, then you can reset the extender.

Q; In which way, the user can enable the guest network feature in the Amped 600mW Gb extender?

A; You can open the web browser. Here the user can write the www.setup.ampedwireless.com or the IP address of the extender. The user can now write the login details. After this, the user can now click on the advanced settings. Here the user can now enable the guest network feature. After this, the user can use this feature easily.

Previous Post
HOW CAN THE USER SETUP THE AMPED 600mW RANGE EXTENDER
Next Post
IN WHICH WAY THE USER CAN RESET THE AMPED WIRELESS 150N EXTENDER

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu