IN WHICH WAY THE USER CAN RESET THE AMPED WIRELESS 150N EXTENDER

  1. Home
  2. AMPED EXTENDER
  3. IN WHICH WAY THE USER CAN RESET THE AMPED WIRELESS 150N EXTENDER

AMPED WIRELESS 150N EXTENDER 

AMPED WIRELESS 150N EXTENDER

 The Amped always offers the best extenders to the users. Now they introduce the Amped Wireless 150N extender, which has heaps of technical features. You can easily attach many devices with them because it comes with Gigabit wires. It has the best network speed so you can play online games, listen to music, and do the many more things you like. First, it receives the signals from your home routers and retransmits it in a new location, and it expands your coverage range. The extender comes with low noise Amplifiers and the detachable antennas, and you can get the best security features like WPA, WPA2 WEP. Your extender is safe from cybercrime. The user can handle al the devices with the Amped Ally app. You can also set up the Amped Wireless 150N extender in many ways, and the user can also block web sites easily.


SETUP OF THE AMPED WIRELESS 150N EXTENDER WITH THE WEB DOMAIN 

 

  • The user can now unwrap the Amped wireless 150N extender.
  • You can place the extender near the router.
  • Here the user can check the home network is working.
  • Following this, the user can connect the antennas with the extender.
  • Now you can connect the electrical supply with the extender.
  • You can check the light of the extender is working well.
  • If in case it is not working well, then the user can press the on/off button on the extender.
  • The user can now attach the extender, modem, and the computer with the help of the ethernet cable.
  • Here the user can open the web browser.
  • Now the user can write the www.setup.ampedwireless.com, or the IP address of the extender is 192.168.1.240.
  • You can write the username and secret word the username, and the secret word both are an admin.
  • After this, the user can see the welcome note on the screen.
  • You can now write the details like language, time of your region.
  • Now you can scan the wifi.
  • It identifies the wifi quickly. If it does not identify, then the user can enter them manually.
  • The user can now use the extender.

WPS SETUP OF THE AMPED WIRELESS 150N EXTENDER 

 

  • You can unwrap the Amped Wireless 150N extender.
  • Here the user can place the extender near the router so they can connect correctly.
  • Check the home network is working correctly.
  • After this, the user can attach the power supply with the extender.
  • Here the user can check the extender get the adequate power supply.
  • In case it does not get the proper power supply, then the user can press the on/off button of the extender.
  • Now you can discover the WPS button on the extender and your router.
  • Here you can press the WPS button first on the extender, and after this, you can press the button on the router.
  • It can start to catch the settings.
  • After a few seconds, the user gets the extender ready for use.

SETUP OF THE AMPED WIRELESS 150N EXTENDER WITH THE AMPED ALLY APP

 

  • Here the user can unwrap the extender.
  • Attach the antennas with the extender.
  • You can place the extender near the router.
  • Connect the power supply with the extender.
  • Check the power light of the extender is working correctly or not.
  • If it is not correctly working then, the user can press the on /off button of the extender.
  • You can now download the Amped ally app from the play store.
  • Here the user can write the details of the model of the extender.
  • The user can scan the QR code of the extender.
  • Now it starts catching the settings.
  • Here the user can use the extender.

LOGIN INTO THE AMPED WIRELESS 150N EXTENDER 

 

  • You can open the web browser.
  • Here the user can write the www.setup.ampedwireless.com or the IP address 192.168.1.240.
  • The user can also write the username and secret word.
  • The username and the secret word both are an admin.

FIRMWARE UPDATE OF THE AMPED WIRELESS 150N EXTENDER 

 

  • You can open the web browser.
  • Here the user now writes the www.setup.ampedwireless.com or the IP address 192.168.1.240.
  • Now you can write the username and the password as admin.
  • After this, the user can now hit the advance settings.
  • You can now again click on the firmware update.
  • Now you can wait for a couple of seconds.
  • The user gets the update firmware with many latest features.

FIRMWARE UPDATE IN THE AMPED WIRELESS 150N EXTENDER WITH THE ALLY APP

 

  • You can download the Ally app from the play store.
  • The user can now write the details of the extender in the app. 
  • Here the user can click on the settings.
  • Now you can click on the firmware update.
  • You can wait for a few seconds.
  • The user can also get an alert about the latest firmware.   
  • Here you get the latest firmware with the security patches

SOFT RESET OF THE AMPED WIRELESS 150N EXTENDER 

 

  • You can open the web browser.
  • Here the user can write www.setup.ampedwireless.com or the IP address of the extender.
  •   The user can now write username and the password, here the username and the password both are admins.
  • You can click on the advance settings.
  • Now the user can again click on factory reset.
  • The user can wait for a couple of seconds.
  • Here the user gets the extender in the default setting.

 HARD RESET OF THE AMPED WIRELESS 150N EXTENDER 

 

  • Locate the reset button on the extender.
  • Here the user holds the reset button with the paper clip for a few seconds.
  • You can also see the lights start flashing.
  • Release the reset button.
  • The user can see the lights become stable.
  • Now your extender is in default settings.
  • Here the user can again use the same method for the set up of the extender.

FREQUENTLY ASK QUESTION (FAQS)

Q; Is it possible to block the websites in the Amped Wireless 150N extender?

A; Yes, it is possible to block the web sites in the extender. You can first open the web browser. Here the user can write www.setup.ampedwireless.com or the IP address of the extender. Now you can write the login details. Here you can again click on the advance settings, and you can again tap on the wireless settings. Here the user can block the websites.

Q; In which way, the user can change the mode of the extender in the Amped wireless 150N extender?

A; You can change the mode easily. Here the user can open the web browser. Now the user can write the www.setup.ampedwireless.com.After this, and the user enters the username and the password as admin. Here the user clicks on the advanced settings> wireless settings. Now the user can change the mode of the extender easily.

Previous Post
HOW CAN THE USER DO THE FIRMWARE UPDATE IN THE AMPED 600mW Gb EXTENDER

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu